P-662H/HW-D Series User’s Guide

2.3.1 Using the Reset Button

1Make sure the POWER LED is on (not blinking).

2Press the RESET button for 10 seconds or until the POWER LED begins to blink and then release it. When the POWER LED begins to blink, the defaults have been restored and the ZyXEL Device restarts.

You can also use the RESET button to:

Activate/Deactivate the wireless network - by pressing the RESET button for 1 second.

Start OTIST - by pressing the RESET button for 3 seconds.

2.4Navigating the Web Configurator

We use the P-662HW-D1 web screens in this guide as an example. Screens vary slightly for different ZyXEL Device models.

2.4.1 Navigation Panel

After you enter the admin password, use the sub-menus on the navigation panel to configure ZyXEL Device features. The following table describes the sub-menus.

Figure 10 Web Configurator: Main Screen

ClickClickthetheLogouticoniconatatanyanytimetime totoexitexithethewebwebconfigurator. .

Use submenus to configure ZyXEL Device

52

Chapter 2 Introducing the Web Configurator