Note: Click the icon (located in the top right corner of most screens) to view embedded help.
Table 3 Web Configurator Screens Summary
LINK/ICON | FUNCTION | |
|
|
|
Wizard | INTERNET/ | Use these screens for initial configuration including general |
| WIRELESS | setup, ISP parameters for Internet Access and WAN IP/DNS |
| SETUP | Server/MAC address assignment. |
| BANDWIDTH | Use these screens to limit bandwidth usage by application or |
| MANAGEMENT | packet type. |
| SETUP |
|
Logout |
| Click this icon to exit the web configurator. |
|
|
|
Status |
| This screen shows the ZyXEL Device’s general device, system |
|
| and interface status information. Use this screen to access the |
|
| summary statistics tables. |
Network |
|
|
|
|
|
Remote Node |
| Use this screen to configure placing calls to a remote gateway. |
|
|
|
WAN | Internet Access | This screen allows you to configure ISP parameters, WAN IP |
| Setup | address assignment, DNS servers and other advanced |
|
| properties. |
| WAN Backup | Use this screen to configure your traffic redirect properties and |
| Setup | WAN backup settings. |
LAN | IP | Use this screen to configure LAN TCP/IP settings, enable Any |
|
| IP and other advanced properties. |
| DHCP Setup | Use this screen to configure LAN DHCP settings. |
|
|
|
| Client List | Use this screen to view current DHCP client information and to |
|
| always assign an IP address to a MAC address (and host |
|
| name). |
| IP Alias | Use this screen to partition your LAN interface into subnets. |
|
|
|
Wireless LAN | General | Use this screen to configure the wireless LAN settings and |
(Wireless devices |
| WLAN authentication/security settings. |
only) | OTIST | This screen allows you to assign wireless clients the ZyXEL |
|
| Device’s wireless security settings. |
| MAC Filter | Use this screen to configure the ZyXEL Device to block access |
|
| to devices or block the devices from accessing the ZyXEL |
|
| Device. |
| QoS | WMM QoS allows you to prioritize wireless traffic according to |
|
| the delivery requirements of the individual and applications. |
DMZ | DMZ | Use this screen to create and enable a DMZ port. |
|
|
|
NAT | General | Use this screen to enable NAT. |
|
|
|
| Port Forwarding | Use this screen to configure servers behind the ZyXEL Device. |
|
|
|
Security |
|
|
|
|
|
Firewall | General | Use this screen to activate/deactivate the firewall and the |
|
| direction of network traffic to which to apply the rule. |
| Rules | This screen shows a summary of the firewall rules, and allows |
|
| you to edit/add a firewall rule. |
| Anti Probing | Use this screen to change your |
|
|
|
Chapter 2 Introducing the Web Configurator | 53 |