ZyXEL Communications HW-D Series, P-662H 6.4 DHCP Setup, Table, Figure 57 DHCP Setup

P-662H/HW-D Series User’s Guide

6.4 DHCP Setup

Use this screen to configure the DNS server information that the ZyXEL Device sends to the DHCP client devices on the LAN.

Figure 57 DHCP Setup

The following table describes the labels in this screen.

Table 32 DHCP Setup

LABEL	DESCRIPTION
DHCP Setup
DHCP	If set to Server, your ZyXEL Device can assign IP addresses, an IP default
	gateway and DNS servers to Windows 95, Windows NT and other systems that
	support the DHCP client.
	If set to None, the DHCP server will be disabled.
	If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays
	DHCP requests and responses between the remote server and the clients.
	Enter the IP address of the actual, remote DHCP server in the Remote DHCP
	Server field in this case.
	When DHCP is used, the following items need to be set:
IP Pool Starting	This field specifies the first of the contiguous addresses in the IP address pool.
Address
Pool Size	This field specifies the size, or count of the IP address pool.
Remote DHCP	If Relay is selected in the DHCP field above then enter the IP address of the
Server	actual remote DHCP server here.
DNS Server
DNS Servers	The ZyXEL Device passes a DNS (Domain Name System) server IP address to
Assigned by DHCP	the DHCP clients.
Server

Chapter 6 LAN Setup 117