Table 2 Front Panel LEDs (continued)
LED | COLOR | STATUS | DESCRIPTION |
|
|
|
|
WLAN (P- | Green | On | The ZyXEL Device is ready, but is not sending/receiving data |
662HW only) |
|
| through the wireless LAN. |
|
| Blinking | The ZyXEL Device is sending/receiving data through the |
|
|
| wireless LAN. |
| None | Off | The wireless LAN is not ready or has failed. |
|
|
|
|
DSL/ACT | Green | On | The ZyXEL Device has a successful DSL connection. |
|
|
|
|
|
| Blinking | The DSL is attempting to synchronize with the ZyXEL |
|
|
| Device. |
|
| Off | The system is not receiving power or there is no DSL |
|
|
| connection. |
INTERNET | Green | On | The ZyXEL Device is connected with no traffic detected. |
|
|
|
|
|
| Blinking | The ZyXEL Device is sending/receiving data. |
|
|
|
|
| Red | On | The ZyXEL Device failed to authenticate. |
|
|
|
|
|
| Off | The DSL line is down. |
|
|
|
|
CON/AUX | Green | On | The CON/AUX switch is set to CON, the CON/AUX port is |
|
|
| connected to a management computer and someone is |
|
|
| logged into the ZyXEL Device. |
| Amber | On | The CON/AUX switch is set to AUX and the CON/AUX port |
|
|
| has an Internet connection through a |
|
| Blinking | The CON/AUX switch is set to AUX and the CON/AUX port is |
|
|
| sending or receiving data through a |
|
|
| TA. |
|
| Off | The CON/AUX link is not ready, or has failed. |
|
|
|
|
Refer to the Quick Start Guide for information on hardware connections.
48 | Chapter 1 Getting To Know Your ZyXEL Device |