This example shows how to configure a guest wireless network with the following parameters.
Table 50 Multiple SSID Example Configuration
PARAMETER | VALUE |
|
|
SSID | guestnetwork |
|
|
Security | |
|
|
WEP key | abcde |
|
|
Other | Intranet blocking is enabled, so that guests only have access to the Internet |
| and cannot access the local network. |
In the following script example all typed commands and parameters have been bolded.
ras> wlan mssid guestssid guestnetwork
Note: the wireless connection will be disconnected temporarily!!! ras> wlan mssid mode 1 1
Note: the wireless connection will be disconnected temporarily!!! Enable GuestSSID
GuestSSID with Intranet Blocking TFTP Client Start
ras> wlan mssid setprivacy type 1 Privacy Setting is WEP64
Note: the wireless connection will be disconnected temporarily!!! TFTP Client Start
ras> wlan mssid setprivacy wepkey 1 abcde
Note: the wireless connection will be disconnected temporarily!!! TFTP Client Start
ras> wlan mssid show Multiple SSID Settings :
==Major SSID Settings == Major SSID = "Wireless"
Major SSID privacy setting is WPA
==Guest SSID Settings == Guest SSID = Enable
Guest SSID = "guestnetwork"
Guest SSID privacy setting is WEP 64 WEP default key ID = 1
WEP key 1 = abcde WEP key 2 =
WEP key 3 = WEP key 4 = Intranet Blocking = 1
Guest SSID AutoOff = Disable
Guest SSID AutoOff Timeout = 0 (minutes) ras>
150 | Chapter 7 Wireless LAN |