2The next wizard screen varies depending on what mode and encapsulation type you use. All screens shown are with routing mode. Configure the fields and click Next to continue. See Section 3.3 on page 72 for wireless connection wizard setup
Figure 24 Internet Connection with PPPoE
The following table describes the fields in this screen.
Table 11 Internet Connection with PPPoE
LABEL | DESCRIPTION |
|
|
User Name | Enter the user name exactly as your ISP assigned. If assigned a name in the form |
| user@domain where domain identifies a service name, then enter both components |
| exactly as given. |
Password | Enter the password associated with the user name above. |
|
|
Service Name | Type the name of your PPPoE service here. |
|
|
Back | Click Back to go back to the previous wizard screen. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Exit | Click Exit to close the wizard screen without saving your changes. |
|
|
Figure 25 Internet Connection with RFC 1483
Chapter 3 Wizard Setup for Internet Access | 69 |