ZyXEL Communications HW-D Series, P-662H Apply, Finish

P-662H/HW-D Series User’s Guide

The following table describes the labels in this screen.

Table 18 Manually assign a WEP key

LABEL	DESCRIPTION
Key	The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
	stations must use the same WEP key for data transmission.
	Enter any 5, 13 or 29 ASCII characters or 10, 26 or 58 hexadecimal characters ("0-9",
	"A-F") for a 64-bit, 128-bit or 256-bit WEP key respectively.
Back	Click Back to display the previous screen.
Next	Click Next to proceed to the next screen.
Exit	Click Exit to close the wizard screen without saving.

5Click Apply to save your wireless LAN settings.

Figure 35 Wireless LAN Setup 3

6Use the read-only summary table to check whether what you have configured is correct. Click Finish to complete and save the wizard setup.

Chapter 3 Wizard Setup for Internet Access 77