Figure 46 More Connections Edit
The following table describes the labels in this screen.
Table 25 More Connections Edit
LABEL | DESCRIPTION |
|
|
Active | Select the check box to activate or clear the check box to deactivate this |
| connection. |
Name | Enter a unique, descriptive name of up to 13 ASCII characters for this |
| connection. |
Mode | Select Routing from the |
| to share an Internet account. |
| If you select Bridge, the ZyXEL Device will forward any packet that it does not |
| route to this remote node; otherwise, the packets are discarded. |
Encapsulation | Select the method of encapsulation used by your ISP from the |
| box. Choices are PPPoA, RFC 1483, ENET ENCAP or PPPoE. |
User Name | (PPPoA and PPPoE encapsulation only) Enter the user name exactly as your |
| ISP assigned. If assigned a name in the form user@domain where domain |
| identifies a service name, then enter both components exactly as given. |
Password | (PPPoA and PPPoE encapsulation only) Enter the password associated with the |
| user name above. |
Service Name | (PPPoE only) Type the name of your PPPoE service here. |
|
|
96 | Chapter 5 WAN Setup |