P-662H/HW-D Series User’s Guide

Figure 43 Internet Connection (PPPoE)

The following table describes the labels in this screen.

Table 22 Internet Connection

LABEL

DESCRIPTION

 

 

General

 

 

 

Name

Enter the name of your Internet Service Provider, e.g., MyISP. This information is

 

for identification purposes only.

Mode

Select Routing (default) from the drop-down list box if your ISP allows multiple

 

computers to share an Internet account. Otherwise select Bridge.

Encapsulation

Select the method of encapsulation used by your ISP from the drop-down list

 

box. Choices vary depending on the mode you select in the Mode field.

 

If you select Bridge in the Mode field, select either PPPoA or RFC 1483.

 

If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET

 

ENCAP or PPPoE.

User Name

(PPPoA and PPPoE only) Enter the user name exactly as your ISP assigned. If

 

assigned a name in the form user@domain where domain identifies a service

 

name, then enter both components exactly as given.

Password

(PPPoA and PPPoE only) Enter the password associated with the user name

 

above.

Service Name

(PPPoE only) Type the name of your PPPoE service here.

 

 

Multiplexing

Select the method of multiplexing used by your ISP from the drop-down list.

 

Choices are VC or LLC.

Chapter 5 WAN Setup

91