|
| |
| Table 28 WAN Backup Advanced Setup | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Connect on | Select Connect on Demand when you don't want the connection up all the time |
| Demand | and specify an idle |
| Max Idle Timeout | Specify an idle |
|
| Demand. The default setting is 0, which means the Internet session will not timeout. |
| Budget | The configuration in the Budget fields has priority over your Connection settings. |
|
|
|
| Allocate Budget | Type the amount of time (in minutes) that the dial backup connection can be used |
|
| during the time configured in the Period field. Set an amount that is less than the |
|
| time period configured in the Period field. If you set the Allocated Budget to 0, you |
|
| will not be able to use the dial backup connection. |
| Period | Type the time period (in hours) for how often the budget should be reset. For |
|
| example, to allow calls to this remote node for a maximum of 10 minutes every |
|
| hour, set the Allocated Budget to 10 (minutes) and the Period to 1 (hour). If you set |
|
| the Period to 0, there is no budget control and the ZyXEL Device uses the |
|
| Connection settings. |
| Back | Click Back to return to the previous screen. |
|
|
|
| Apply | Click Apply to save the changes. |
|
|
|
| Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
|
5.10 Dial Backup Modem Setup
Click Edit in the WAN > WAN Backup Setup > Advanced Setup screen to configure the advanced modem settings.
Chapter 5 WAN Setup | 105 |