Figure 51 WAN Backup Advanced Setup
The following table describes the labels in this screen.
Table 28 WAN Backup Advanced Setup
LABEL | DESCRIPTION |
|
|
Authentication | Use the |
Type | Options are: |
| CHAP/PAP - Your ZyXEL Device accepts either CHAP or PAP when requested by |
| this remote node. |
| CHAP - Your ZyXEL Device accepts CHAP only. |
| PAP - Your ZyXEL Device accept PAP only. |
|
|
Secondary Phone | Type the secondary phone number from the ISP for this remote node. If the primary |
Number | phone number is busy or does not answer, your ZyXEL Device dials the secondary |
| phone number if available. Some areas require dialing the pound sign # before the |
| phone number for local calls. Include a # symbol at the beginning of the phone |
| numbers as required. |
Dial Backup Port | Use the |
Speed | backup port and the external device. Available speeds are: 9600, 19200, 38400, |
| 57600, 115200 or 230400 bps. |
AT Command | Type the AT command string to initialize the WAN device. Consult the manual of |
Initial String | your WAN device connected to your dial backup port for specific AT commands. |
Chapter 5 WAN Setup | 103 |