Figure 78 Multiple SSID Network Example
In this section the second wireless network is referred to as the “guest wireless network” and user’s connecting to this network are referred to as “guests”.
Multiple SSID is only configurable via commands. The next sections describe multiple SSID commands and show a configuration example. See Appendix H on page 419 for information on the command structure and how to access the CLI (Command Line Interface) on the ZyXEL Device.
7.10.1 Multiple SSID CommandsUse the wlan mssid commands to configure multiple SSID on the ZyXEL Device. The commands must be entered in the following syntax:
wlan mssid guestssid <ssid>
wlan mssid mode [0:disable guestssid 1:enable guestssid] [0:disable
wlan mssid setprivacy type <0:NO 1:WEP64 2:WEP128 3:WEP256> wlan mssid setprivacy key
wlan mssid setprivacy defaultkey
wlan mssid guest_autoOff < <1:on, 0:off> <Timeout (minutes), 0 for
wlan mssid show
148 | Chapter 7 Wireless LAN |