P-662H/HW-D Series User’s Guide

7.5.1 No Security

Select No Security to allow wireless stations to communicate with the access points without any data encryption.

Note: If you do not enable any wireless security on your ZyXEL Device, your network is accessible to any wireless networking device that is within range.

Figure 63 Wireless: No Security

The following table describes the labels in this screen.

Table 38 Wireless No Security

LABEL

DESCRIPTION

 

 

Security Mode

Choose No Security from the drop-down list box.

 

 

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

Cancel

Click Cancel to reload the previous configuration for this screen.

 

 

Advanced

Click Advanced Setup to display the Wireless Advanced Setup screen and edit

Setup

more details of your WLAN setup.

7.5.2 WEP Encryption Screen

In order to configure and enable WEP encryption; click Network > Wireless LAN to display the General screen. Select Static WEP from the Security Mode list.

Chapter 7 Wireless LAN

129