P-662H/HW-D Series User’s Guide

Note: If you do not replace the certificate, the following screen appears every time you log in.

Figure 8 Replace Factory Default Certificate

8Select Go to Wizard setup and click Apply to display the wizard main screen. Otherwise, select Go to Advanced setup and click Apply to display the Status screen.

Figure 9 Select a Mode

Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes). Simply log back into the ZyXEL Device if this happens to you.

2.3 Resetting the ZyXEL Device

If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the ZyXEL Device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to “1234”.

Chapter 2 Introducing the Web Configurator

51