P-662H/HW-D Series User’s Guide

The following table describes the labels in this screen.

Table 33 LAN Client List

LABEL

DESCRIPTION

 

 

IP Address

Enter the IP address that you want to assign to the computer on your LAN with the

 

MAC address specified below.

 

The IP address should be within the range of IP addresses you specified in the

 

DHCP Setup for the DHCP client.

MAC Address

Enter the MAC address of a computer on your LAN.

 

 

Add

Click Add to add a static DHCP entry.

 

 

#

This is the index number of the static IP table entry (row).

 

 

Status

This field displays whether the client is connected to the ZyXEL Device.

 

 

Host Name

This field displays the computer host name.

 

 

IP Address

This field displays the IP address relative to the # field listed above.

 

 

MAC Address

The MAC (Media Access Control) or Ethernet address on a LAN (Local Area

 

Network) is unique to your computer (six pairs of hexadecimal notation).

 

A network interface card such as an Ethernet adapter has a hardwired address

 

that is assigned at the factory. This address follows an industry standard that

 

ensures no other adapter has a similar address.

Reserve

Select the check box(es) in each entry to have the ZyXEL Device always assign

 

the selected entry(ies)’s IP address(es) to the corresponding MAC address(es)

 

(and host name(s)). You can select up to 32 entries in this table.

Modify

Click the modify icon to have the IP address field editable and change it.

 

 

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

Refresh

Click Refresh to reload the DHCP table.

 

 

6.6 LAN IP Alias

IP alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN network.

When you use IP alias, you can also configure firewall rules to control access between the LAN's logical networks (subnets).

Note: Make sure that the subnets of the logical networks do not overlap.

The following figure shows a LAN divided into subnets A, B, and C.

Chapter 6 LAN Setup

119