14.2 Activating CAC and Creating User Groups
From the main menu click Security > Content Access Control and General to open the configuration screen.
Use this screen to activate Content Access Control and set up the four user groups.
Note: You must set up all four user groups.
Figure 116 Content Access Control: General
The following table describes the labels in this screen.
Table 78 Content Access Control: General
LABEL | DESCRIPTION |
|
|
| |
Enable | Select the check box to allow the LAN administrator to have control over a LAN user’s | |
Content | Internet access. |
|
Access |
|
|
Control |
|
|
Idle Timeout | Type the time in minutes that elapses before the ZyXEL Device automatically | |
| terminates the Internet session. The default time is 10 minutes. | |
Group List | These groups are used in conjunction with content filtering to decide which web pages | |
| cannot be accessed by the user. You can set up to four user groups. | |
Group Name | Enter the name of a user group for identification purposes. | |
|
| |
Restrictions | Use the links below to configure the access restrictions for the user group. | |
|
|
|
Time | Click the Edit ( | )icon to set up the time allowances, start times and end times of the |
| day(s) when access is allowed. | |
|
|
|
216 | Chapter 14 Content Access Control |