P-662H/HW-D Series User’s Guide

Figure 169 Remote Management: SNMP

The following table describes the labels in this screen.

Table 129 Remote Management: SNMP

LABEL

DESCRIPTION

 

 

SNMP

 

 

 

Port

You may change the server port number for a service if needed, however you

 

must use the same port number in order to use that service for remote

 

management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device

 

using this service.

Secured Client IP

A secured client is a “trusted” computer that is allowed to communicate with the

 

ZyXEL Device using this service.

 

Select All to allow any computer to access the ZyXEL Device using this service.

 

Choose Selected to just allow the computer with the IP address that you specify

 

to access the ZyXEL Device using this service.

SNMP Configuration

 

 

 

Get Community

Enter the Get Community, which is the password for the incoming Get and

 

GetNext requests from the management station. The default is public and allows

 

all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests

 

from the management station. The default is public and allows all requests.

Trap

 

 

 

Community

Type the trap community, which is the password sent with each trap to the

 

SNMP manager. The default is public and allows all requests.

Destination

Type the IP address of the station to send your SNMP traps to.

 

 

Apply

Click Apply to save your customized settings and exit this screen.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

316

Chapter 21 Remote Management Configuration