ZyXEL Communications HW-D Series, P-662H manual 288

P-662H/HW-D Series User’s Guide

Figure 154 Directory Server Add

The following table describes the labels in this screen.

Table 112 Directory Server Add

LABEL	DESCRIPTION
Directory Service
Setting
Name	Type up to 31 ASCII characters (spaces are not permitted) to identify this directory
	server.
Access Protocol	Use the drop-down list box to select the access protocol used by the directory
	server.
	LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that
	specifies how clients access directories of certificates and lists of revoked
	certificates.1
Server Address	Type the IP address (in dotted decimal notation) or the domain name of the
	directory server.
Server Port	This field displays the default server port number of the protocol that you select in
	the Access Protocol field.
	You may change the server port number if needed, however you must use the
	same server port number that the directory server uses.
	389 is the default server port number for LDAP.
Login Setting
Login	The ZyXEL Device may need to authenticate itself in order to assess the directory
	server. Type the login name (up to 31 ASCII characters) from the entity
	maintaining the directory server (usually a certification authority).
Password	Type the password (up to 31 ASCII characters) from the entity maintaining the
	directory server (usually a certification authority).
Apply	Click Apply to save your changes back to the ZyXEL Device.
Cancel	Click Cancel to quit configuring this screen and return to the Directory Servers
	screen.

1.At the time of writing, LDAP is the only choice of directory server access protocol.

288 Chapter 17 Certificates