P-662H/HW-D Series User’s Guide

AP PE N D I X K

Firewall Commands

The following describes the firewall commands.

Table 167

Firewall Commands

 

 

 

 

 

FUNCTION

 

COMMAND

DESCRIPTION

 

 

 

Firewall SetUp

 

 

 

 

 

 

 

 

config edit firewall active

This command turns the firewall on or off.

 

 

<yes no>

 

 

 

 

 

 

 

config retrieve firewall

This command returns the previously saved

 

 

 

firewall settings.

 

 

 

 

 

 

config save firewall

This command saves the current firewall

 

 

 

settings.

 

 

 

 

Display

 

 

 

 

 

 

 

 

 

config display firewall

This command shows the of all the firewall

 

 

 

settings including e-mail, attack, and the sets/

 

 

 

rules.

 

 

 

 

 

 

config display firewall set

This command shows the current

 

 

<set #>

configuration of a set; including timeout

 

 

 

values, name, default-permit, and etc.If you

 

 

 

don’t put use a number (#) after “set”,

 

 

 

information about all of the sets/rules appears.

 

 

 

 

 

 

config display firewall set

This command shows the current entries of a

 

 

<set #> rule <rule #>

rule in a firewall rule set.

 

 

 

 

 

 

config display firewall attack

This command shows all of the attack

 

 

 

response settings.

 

 

 

 

 

 

config display firewall e-mail

This command shows all of the e-mail

 

 

 

settings.

 

 

 

 

 

 

config display firewall?

This command shows all of the available

 

 

 

firewall sub commands.

 

 

 

 

Edit

 

 

 

 

 

 

 

Appendix K Firewall Commands

427