Chapter 10 Device HA

Table 45 Configuration > Device HA > Active-Passive Mode (continued)

LABEL

DESCRIPTION

Password

Enter the password used for verification during synchronization. Every

 

NWA3000-N series AP in the virtual router must use the same

 

password.

 

If you leave this field blank in the master NWA3000-N series AP, no

 

backup NWA3000-N series APs can synchronize from it.

 

If you leave this field blank in a backup NWA3000-N series AP, it cannot

 

synchronize from the master NWA3000-N series AP.

 

 

Auto

Select this to get the updated configuration automatically from the

Synchronize

specified NWA3000-N series AP according to the specified Interval.

 

The first synchronization begins after the specified Interval; the

 

NWA3000-N series AP does not synchronize immediately.

 

 

Interval

When you select Auto Synchronize, set how often the NWA3000-N

 

series AP synchronizes with the master.

 

 

Apply

This appears when the NWA3000-N series AP is currently using active-

 

passive mode device HA. Click Apply to save your changes back to the

 

NWA3000-N series AP.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

10.3.1 Edit Monitored Interface

This screen lets you enable or disable monitoring of an interface and set the interface’s management IP address and subnet mask. To access this screen, click Configuration > Device HA > Active-Passive Mode > Edit.

Figure 59 Device HA > Active-Passive Mode > Edit Monitored Interface

134

 

NWA3000-N Series User’s Guide