Chapter 8 LAN Setting
Each field is described in the following table.
Table 34 Configuration > LAN Setting
LABEL | DESCRIPTION |
IP Address |
|
Assignment |
|
|
|
Get | This option appears when the MGNT Mode is set to Stand Alone AP. |
Automatically | Select this to make the interface a DHCP client and automatically get |
| the IP address, subnet mask, and gateway address from a DHCP |
| server. |
|
|
Use Fixed IP | Select this if you want to specify the IP address, subnet mask, and |
Address | gateway manually. You can only configure a fixed IP address when the |
| MGNT Mode is set to Stand Alone AP. |
|
|
IP Address | Enter the IP address for this interface. |
|
|
Subnet Mask | Enter the subnet mask of this interface in dot decimal notation. The |
| subnet mask indicates what part of the IP address is the same for all |
| computers in the network. |
|
|
Gateway | Enter the IP address of the gateway. The |
| packets to the gateway when it does not know how to route the |
| packet to its destination. The gateway should be on the same network |
| as the interface. |
|
|
DNS Server | Use this section to specify the IP addresses for the |
Settings | AP to use. Use one of the following ways to specify these IP |
| addresses. |
| |
| From ISP - select the DNS server that another interface received |
| from its DHCP server. |
|
|
Add | Click this to create a new entry. Select an entry and click Add to |
| create a new entry after the selected entry. |
|
|
Edit | |
| the entry’s settings. |
|
|
Remove | To remove an entry, select it and click Remove. The |
| series AP confirms you want to remove it before doing so. Note that |
| subsequent entries move up by one when you take this action. |
|
|
Move | To change an entry’s position in the numbered list, select the entry |
| and click Move to display a field to type a number for where you want |
| to put it and press [ENTER] to move the rule to the number that you |
| typed. |
|
|
# | This is the index number of the DNS server address entry. The |
| ordering of your entries is important as the |
| uses them in sequence. |
| A hyphen |
| |
| for any of the other servers. |
|
|
Type | This displays whether the DNS server IP address is assigned by a |
| DHCP server dynamically (From DHCP), is configured manually |
| |
| uses if it cannot get a reply for any of the other servers. |
|
|
| 109 |
|
|