13
MON Profile
13.1 Overview
This screen allows you to set up monitor mode configurations that allow your connected APs to scan for other wireless devices in the vicinity. Once detected, you can use the MON Mode screen (Chapter 9 on page 111) to classify them as either rogue or friendly and then manage them accordingly.
13.1.1 What You Can Do in this Chapter
The MON Profile screen (Section 13.2 on page 166) creates preset monitor mode configurations that can be used by the APs.
13.1.2 What You Need To Know
The following terms and concepts may help as you read this chapter.
Active Scan
An active scan is performed when an
Passive Scan
A passive scan is performed when an
| 165 |
|
|