19

Reboot

19.1 Overview

Use this to restart the device.

19.1.1 What You Need To Know

If you applied changes in the Web configurator, these were saved automatically and do not change when you reboot. If you made changes in the CLI, however, you have to use the write command to save the configuration before you reboot. Otherwise, the changes are lost when you reboot.

Reboot is different to reset; reset returns the device to its default configuration.

19.2 Reboot

This screen allows remote users can restart the device. To access this screen, click Maintenance > Reboot.

Figure 123 Maintenance > Reboot

Click the Reboot button to restart the NWA3000-N series AP. Wait a few minutes until the login screen appears. If the login screen does not appear, type the IP address of the device in your Web browser.

You can also use the CLI command reboot to restart the NWA3000-N series AP.

 

263

NWA3000-N Series User’s Guide