Chapter 15 System

To change your NWA3000-N series AP’s FTP settings, click Configuration > System > FTP tab. The screen appears as shown. Use this screen to specify FTP settings.

Figure 101 Configuration > System > FTP

The following table describes the labels in this screen.

Table 76 Configuration > System > FTP

LABEL

DESCRIPTION

Enable

Select the check box to allow or disallow the computer with the IP

 

address that matches the IP address(es) in the Service Control table to

 

access the NWA3000-N series AP using this service.

 

 

TLS required

Select the check box to use FTP over TLS (Transport Layer Security) to

 

encrypt communication.

 

This implements TLS as a security mechanism to secure FTP clients and/

 

or servers.

 

 

Server Port

You may change the server port number for a service if needed, however

 

you must use the same port number in order to use that service for

 

remote management.

 

 

Server

Select the certificate whose corresponding private key is to be used to

Certificate

identify the NWA3000-N series AP for FTP connections. You must have

 

certificates already configured in the My Certificates screen.

 

 

Apply

Click Apply to save your changes back to the NWA3000-N series AP.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

216

 

NWA3000-N Series User’s Guide