Chapter 9 Wireless
9.6 DCS
Use this screen to configure dynamic radio channel selection. Click Configuration
>Wireless > DCS to access this screen.
Figure 52 Configuration > Wireless > DCS
Each field is described in the following table.
Table 43 Configuration > Wireless > DCS
LABEL | DESCRIPTION |
Enable Dynamic | Select this to have the |
Channel Selection | radio channel upon which it broadcasts by scanning the area around it |
| and determining what channels are currently being used by other |
| devices. |
|
|
DCS Time | Enter a number of minutes. This regulates how often the |
Interval | series AP surveys the other APs within its broadcast radius. If the |
| channel on which it is currently broadcasting suddenly comes into use |
| by another AP, the |
| the next available clean channel or a channel with lower interference. |
|
|
122 |
| |
| ||
|
|
|