ZyXEL Communications NWA3000-N 4.1.2Set the LAN IP Address and Management VLAN (vlan99), 4.1.1.1 Controller, 4.1.1.2 Managed APs

Chapter 4 Tutorials

4.1.1.1 Controller

1Use the Configuration > MGNT MODE screen to set the NWA3000-N series AP to controller mode.

2The NWA3000-N series AP resets to its default settings for the controller mode including the IP address of 192.168.1.2 and restarts. Wait a short while before you attempt to log in again.

4.1.1.2 Managed APs

1Log into the other NWA3000-N series APs and use the Configuration > MGNT MODE screen to set them to be the managed APs using the Auto IP address option so they obtain the controller’s IP address from the DHCP server.

2Now you can no longer log into the web configurator of the managed NWA3000-N series APs; you must manage the NWA3000-N series AP through the controller AP on your network.

4.1.2Set the LAN IP Address and Management VLAN (vlan99)

This section shows you how to set up the LAN IP address and the VLAN for managing the controller. This is only for network administrators to manage the controller.

	57
NWA3000-N Series User’s Guide