Chapter 5 Dashboard

Table 17 Dashboard (continued)

LABEL

DESCRIPTION

WDS Link Status

This section displays information about the WDS settings when the

 

NWA3000-N series AP is in controller mode and configured to use

 

WDS.

 

 

Radio

This field displays which radio the NWA3000-N series AP is configured

 

to use for WDS.

 

 

Link ID

This field displays the name of the bridge connection.

 

 

Peer MAC

This field displays the hardware address of the peer device.

Address

 

 

 

Security

This field displays which type of security the NWA3000-N series AP is

 

using for WDS with this radio.

 

 

Status

This field displays the status of the connection to the peer device.

 

 

System Status

 

 

 

System

This field displays how long the NWA3000-N series AP has been

Uptime

running since it last restarted or was turned on.

 

 

Current Date/

This field displays the current date and time in the NWA3000-N series

Time

AP. The format is yyyy-mm-dd hh:mm:ss.

 

 

Current Login

This field displays the user name used to log in to the current session,

User

the amount of reauthentication time remaining, and the amount of

 

lease time remaining.

 

 

Boot Status

This field displays details about the NWA3000-N series AP’s startup

 

state.

 

OK - The NWA3000-N series AP started up successfully.

 

Firmware update OK - A firmware update was successful.

 

Problematic configuration after firmware update - The

 

application of the configuration failed after a firmware upgrade.

 

System default configuration - The NWA3000-N series AP

 

successfully applied the system default configuration. This occurs

 

when the NWA3000-N series AP starts for the first time or you

 

intentionally reset the NWA3000-N series AP to the system default

 

settings.

 

Fallback to lastgood configuration - The NWA3000-N series AP

 

was unable to apply the startup-config.conf configuration file and fell

 

back to the lastgood.conf configuration file.

 

Fallback to system default configuration - The NWA3000-N

 

series AP was unable to apply the lastgood.conf configuration file and

 

fell back to the system default configuration file (system-

 

default.conf).

 

Booting in progress - The NWA3000-N series AP is still applying the

 

system configuration.

 

 

Management

This shows whether the NWA3000-N series AP is set to control other

Mode

NWA3000-N series APs, work as a stand alone AP, or be controlled by

 

another NWA3000-N series AP.

 

 

Interface Status

If an Ethernet interface does not have any physical ports associated

Summary

with it, its entry is displayed in light gray text. Click the Detail icon to

 

go to a (more detailed) summary screen of interface statistics.

 

 

78

 

NWA3000-N Series User’s Guide