Chapter 2 The Web Configurator

Note: To view the functions in the Web Configurator user interface that correspond

directly to specific NWA3000-N series AP CLI commands, use the CLI Messages window (see Section 2.3.5.1 on page 40) in tandem with this one.

Figure 16 Console

The following table describes the elements in this screen.

Table 9 Console

LABEL DESCRIPTION

Command Line

Enter commands for the device that you are currently logged into here. If you are logged into the NWA3000-N series AP, see the CLI Reference Guide for details on using the command line to configure it.

Device IP

Address

This is the IP address of the device that you are currently logged into.

Logged-In User

This displays the username of the account currently logged into the

NWA3000-N series AP through the Console Window.

Note: You can log into the Web Configurator with a different account than used to log into the NWA3000-N series AP through the Console.

 

41

NWA3000-N Series User’s Guide