Chapter 17 File Manager

After you see the Firmware Upload in Process screen, wait two minutes before logging into the NWA3000-N series AP again.

Note: The NWA3000-N series AP automatically reboots after a successful upload.

The NWA3000-N series AP automatically restarts causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 115 Network Temporarily Disconnected

After five minutes, log in again and check your new firmware version in the Dashboard screen.

17.4 Shell Script

Use shell script files to have the NWA3000-N series AP use commands that you specify. Use a text editor to create the shell script files. They must use a “.zysh” filename extension.

Click Maintenance > File Manager > Shell Script to open this screen. Use the Shell Script screen to store, name, download, upload and run shell script files. You can store multiple shell script files on the NWA3000-N series AP at the same time.

Note: You should include write commands in your scripts. If you do not use the write command, the changes will be lost when the NWA3000-N series AP restarts. You could use multiple write commands in a long script.

Figure 116 Maintenance > File Manager > Shell Script

 

249

NWA3000-N Series User’s Guide