Chapter 17 File Manager
17.3 Firmware Package
Click Maintenance > File Manager > Firmware Package to open this screen. Use the Firmware Package screen to check your current firmware version and upload firmware to the
Note: The Web Configurator is the recommended method for uploading firmware. You only need to use the command line interface if you need to recover the firmware. See the CLI Reference Guide for how to determine if you need to recover the firmware and how to recover it.
Find the firmware package at www.zyxel.com in a file that (usually) uses a .bin extension.
The firmware update can take up to five minutes. Do not turn off or reset the
Figure 114 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 89 Maintenance > File Manager > Firmware Package
LABEL | DESCRIPTION |
Boot | This is the version of the boot module that is currently on the |
Module | series AP. |
|
|
Current | This is the firmware version and the date created. |
Version |
|
|
|
Released | This is the date that the version of the firmware was created. |
Date |
|
|
|
File Path | Type in the location of the file you want to upload in this field or click Browse |
| ... to find it. |
|
|
Browse... | Click Browse... to find the .bin file you want to upload. Remember that you |
| must decompress compressed (.zip) files before you can upload them. |
|
|
Upload | Click Upload to begin the upload process. This process may take up to two |
| minutes. |
|
|
248 |
| |
| ||
|
|
|