Chapter 3 Configuration Basics

3.5.2 Logs and Reports

The NWA3000-N series AP provides a system log, offers two e-mail profiles to which to send log messages, and sends information to four syslog servers. It can also e-mail you statistical reports on a daily basis.

MENU ITEM(S) Configuration > Log & Report

3.5.3 File Manager

Use these screens to upload, download, delete, or run scripts of CLI commands. You can manage:

•Configuration files. Use configuration files to back up and restore the complete configuration of the NWA3000-N series AP. You can store multiple configuration files in the NWA3000-N series AP and switch between them without restarting.

•Shell scripts. Use shell scripts to run a series of CLI commands. These are useful for large, repetitive configuration changes and for troubleshooting.

You can edit configuration files and shell scripts in any text editor.

MENU ITEM(S) Maintenance > File Manager

3.5.4 Diagnostics

The NWA3000-N series AP can generate a file containing the NWA3000-N series AP’s configuration and diagnostic information. It can also capture packets going through the NWA3000-N series AP’s interfaces so you can analyze them to identify network problems

MENU ITEM(S) Maintenance > Diagnostics

3.5.5 Shutdown

Use this to shutdown the device in preparation for disconnecting the power.

Always use Maintenance > Shutdown > Shutdown or the shutdown command before you turn off the NWA3000-N series AP or remove the power. Not doing so can cause the firmware to become corrupt.

MENU ITEM(S) Maintenance > Shutdown

 

53

NWA3000-N Series User’s Guide