Appendix A Log Descriptions
Table 103 WLAN Logs
LOG MESSAGE | DESCRIPTION |
Wlan %s is enabled. | The WLAN (IEEE 802.11 b and or g) feature has been turned |
| on. %s is the slot number where the WLAN card is or can be |
| installed. |
|
|
Wlan %s is disabled. | The WLAN (IEEE 802.11 b and or g) feature has been turned |
| off. %s is the slot number where the WLAN card is or can be |
| installed. |
|
|
Wlan %s has been | The WLAN (IEEE 802.11 b and or g) feature’s configuration |
configured. | has been changed. %s is the slot number where the WLAN |
| card is or can be installed. |
|
|
Interface %s has been | The configuration of the specified WLAN interface (%s) has |
configured. | been changed. |
|
|
Interface %s has been | The specified WLAN interface (%s) has been removed. |
deleted. |
|
|
|
Create interface %s | The wireless device failed to create the specified WLAN |
has failed. Wlan | interface (%s). Remove the wireless device and reinstall it. |
device does not exist. |
|
|
|
System internal error. | IEEE 802.1x or WPA is not enabled. |
No 802.1X or WPA |
|
enabled! |
|
|
|
System internal error. | The |
Error configuring WPA | wireless device to use WPA. Remove the wireless device and |
state! | reinstall it. |
|
|
System internal error. | The |
Error enabling WPA/ | 802.1X. |
802.1X! |
|
|
|
Station has | A wireless client with the specified MAC address (second %s) |
associated. Interface: | associated with the specified WLAN interface (first %s). |
%s, MAC: %s. |
|
|
|
WPA or WPA2 enterprise | There was an EAP timeout for a wireless client connected to |
EAP timeout. | the specified WLAN interface (first %s). The MAC address of |
Interface: %s, MAC: | the wireless client is listed (second %s). |
%s. |
|
|
|
Station association | A wireless client with the specified MAC address (second %s) |
has failed. Maximum | failed to connect to the specified WLAN interface (first %s) |
associations have | because the WLAN interface already has its maximum |
reached the maximum | number of wireless clients. |
number. Interface: %s, |
|
MAC: %s. |
|
|
|
WPA authentication has | A wireless client used an incorrect WPA key and thus failed to |
failed. Interface: %s, | connect to the specified WLAN interface (first %s). The MAC |
MAC: %s. | address of the wireless client is listed (second %s). |
|
|
Incorrect password for | A wireless client used an incorrect WPA or WPA2 user |
WPA or WPA2 enterprise | password and failed authentication by the |
internal | AP’s local user database while trying to connect to the |
authentication. | specified WLAN interface (first %s). The MAC address of the |
Interface: %s, MAC: | wireless client is listed (second %s). |
%s. |
|
|
|
296 |
| |
| ||
|
|
|