Chapter 10 Device HA
The following table describes the labels in this screen.
Table 46 Device HA >
LABEL | DESCRIPTION |
Enable | Select this to have device HA monitor the status of this interface’s |
Monitored | connection. |
Interface |
|
|
|
Interface | This identifies the interface. |
Name |
|
|
|
Virtual Router | This is the interface’s (static) IP address and subnet mask in the virtual |
IP (VRIP) / | router. Whichever |
Subnet Mask | master uses this virtual router IP address and subnet mask. These fields |
| are blank if the interface is a DHCP client or has no IP settings. |
|
|
Manage IP | Enter the interface’s IP address for management access. You can use |
| this IP address to access the |
| master or a backup. This management IP address should be in the same |
| subnet as the interface IP address. |
|
|
Manage IP | Enter the subnet mask of the interface’s management IP address. |
Subnet Mask |
|
|
|
OK | Click OK to save your changes back to the |
|
|
Cancel | Click Cancel to exit this screen without saving your changes. |
|
|
10.4 Technical Reference
The following section contains additional technical information about the features described in this chapter.
Virtual Router
The master and backup
Figure 60 Virtual Router
A
B
| 135 |
|
|