ZyXEL Communications NWA3000-N manual 21

Chapter 1 Introduction

•If two or more NWA3000-N series APs (in bridge mode) are connected to the same hub.

Figure 4 Bridge Loop: Two Bridges Connected to Hub

•If your NWA3000-N series AP (in bridge mode) is connected to a wired LAN while communicating with another wireless bridge that is also connected to the same wired LAN.

Figure 5 Bridge Loop: Bridge Connected to Wired LAN

To prevent bridge loops, ensure that you enable Spanning Tree Protocol (STP) in the Wireless screen or your NWA3000-N series AP is not set to bridge mode while connected to both wired and wireless segments of the same LAN.

	21
NWA3000-N Series User’s Guide