Chapter 15 System

To change your NWA3000-N series AP’s time based on your local time zone and date, click Configuration > System > Date/Time. The screen displays as shown. You can manually set the NWA3000-N series AP’s time and date or have the NWA3000-N series AP get the date and time from a time server.

Figure 85 Configuration > System > Date/Time

The following table describes the labels in this screen.

Table 70 Configuration > System > Date/Time

LABEL

DESCRIPTION

Current Time and

 

Date

 

 

 

Current Time

This field displays the present time of your NWA3000-N series AP.

 

 

Current Date

This field displays the present date of your NWA3000-N series AP.

 

 

Time and Date

 

Setup

 

 

 

Manual

Select this radio button to enter the time and date manually. If you

 

configure a new time and date, time zone and daylight saving at the

 

same time, the time zone and daylight saving will affect the new time

 

and date you entered. When you enter the time settings manually, the

 

NWA3000-N series AP uses the new setting once you click Apply.

 

 

New Time (hh-

This field displays the last updated time from the time server or the

mm-ss)

last time configured manually.

 

When you set Time and Date Setup to Manual, enter the new time

 

in this field and then click Apply.

 

 

 

195

NWA3000-N Series User’s Guide