•If there is a startup-config.conf, the NWA3000-N series AP checks it for errors and applies it. If there are no errors, the NWA3000-N series AP uses it and copies it to the lastgood.conf configuration file as a back up file. If there is an error, the NWA3000-N series AP generates a log and copies the startup- config.conf configuration file to the startup-config-bad.confconfiguration file and tries the existing lastgood.conf configuration file. If there isn’t a lastgood.conf configuration file or it also has an error, the NWA3000-N series AP applies the system-default.confconfiguration file.
•You can change the way the startup-config.conffile is applied. Include the setenv-startupstop-on-error off command. The NWA3000-N series AP ignores any errors in the startup-config.conffile and applies all of the valid commands. The NWA3000-N series AP still generates a log for any errors.
Figure 113 Maintenance > File Manager > Configuration File
Do not turn off the NWA3000-N series AP while configuration file upload is in progress.
244 | |
NWA3000-N Series User’s Guide | |
| | |