Chapter 10 Device HA
10.2 Device HA General
This screen lets you enable or disable device HA, and displays which device HA mode the
Figure 57 Configuration > Device HA > General
The following table describes the labels in this screen.
Table 44 Configuration > Device HA > General
LABEL | DESCRIPTION |
Enable Device | Turn the |
HA |
|
| Note: It is not recommended to use STP (Spanning Tree Protocol) |
| with device HA. |
|
|
Device HA | This displays |
Mode | not supported by the |
| The master and its backups must all use the same device HA mode. |
|
|
Monitored | This table shows the status of the interfaces that you selected for |
Interface | monitoring in the other device HA screens. |
Summary |
|
|
|
# | This is the entry’s index number in the list. |
|
|
Interface | These are the names of the interfaces that are monitored by device HA. |
|
|
Virtual Router | This is the interface’s IP address and subnet mask. Whichever |
IP / Netmask | |
| and subnet mask. |
|
|
Management | This field displays the interface’s management IP address and subnet |
IP / Netmask | mask. You can use this IP address and subnet mask to access the |
| |
|
|
Link Status | This tells whether the monitored interface’s connection is down or up. |
|
|
| 129 |
|
|