Chapter 15 System

Table 78 Configuration > System > SNMP (continued)

LABEL

DESCRIPTION

Set Community

Enter the Set community, which is the password for incoming Set

 

requests from the management station. The default is private and allows

 

all requests.

 

 

SNMPv3

Select this to allow SNMP managers using SNMPv3 to access the

 

NWA3000-N series AP.

 

 

Add

Click this to create a new entry. Select an entry and click Add to create

 

a new entry after the selected entry.

 

 

Edit

Double-click an entry or select it and click Edit to be able to modify the

 

entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The NWA3000-N series

 

AP confirms you want to remove it before doing so. Note that

 

subsequent entries move up by one when you take this action.

 

 

#

This the index number of an SNMPv3 user profile.

 

 

User Name

This is the name of the user for which this SNMPv3 user profile is

 

configured.

 

 

Authentication

This field displays the type of authentication the SNMPv3 user must use

 

to connect to the NWA3000-N series AP using this SNMPv3 user profile.

 

 

Privacy

This field displays the type of encryption the SNMPv3 user must use to

 

connect to the NWA3000-N series AP using this SNMPv3 user profile.

 

 

Privilege

This field displays whether the SNMPv3 user can have read-only or read

 

and write access to the NWA3000-N series AP using this SNMPv3 user

 

profile.

 

 

Apply

Click Apply to save your changes back to the NWA3000-N series AP.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

15.9.4 Adding or Editing an SNMPv3 User Profile

This screen allows you to add or edit an SNMPv3 user profile. To access this screen, click the Configuration > System > SNMP screen’s Add button or select a SNMPv3 user profile from the list and click the Edit button.

Figure 104 Configuration > System > SNMP > Add

220

 

NWA3000-N Series User’s Guide