Chapter 9 Wireless
9.3 AP Management
Use this screen to manage all of the APs connected to the
Figure 44 Configuration > Wireless > AP Management (Controller Mode)
The following fields display if the
Table 37 Configuration > Wireless > AP Management (Controller Mode)
LABEL | DESCRIPTION |
Edit | Select an AP and click this button to edit its properties. |
|
|
Remove | Select an AP and click this button to remove it from the list. |
| Note: If in the Configuration > Wireless > Controller screen |
| you set the Registration Type to Always Accept, then as |
| soon as you remove an AP from this list it reconnects. |
|
|
Reboot | Select an AP and click this button to force it to restart. |
|
|
# | This field is a sequential value, and it is not associated with any |
| interface. |
|
|
IP Address | This field displays the IP address of the AP. |
|
|
MAC | This field displays the MAC address of the AP. |
|
|
Model | This field displays the AP’s hardware model information. It displays |
| “N/A” (not applicable) only when the AP disconnects from the |
| |
|
|
R1 Mode / Profile | This field displays the AP or MON profile for Radio 1. |
|
|
R2 Mode / Profile | If the |
| AP or MON profile for Radio 2. |
|
|
Mgnt. VLAN ID | This field displays the ID of the AP’s management VLAN. |
|
|
Description | This field displays the AP’s description, which you can configure by |
| selecting the AP and clicking the Edit button. |
| 113 |
|
|