Chapter 15 System

Figure 100 Configuration > System > TELNET

The following table describes the labels in this screen.

Table 75 Configuration > System > TELNET

LABEL

DESCRIPTION

Enable

Select the check box to allow or disallow the computer with the IP

 

address that matches the IP address(es) in the Service Control table to

 

access the NWA3000-N series AP CLI using this service.

 

 

Server Port

You may change the server port number for a service if needed, however

 

you must use the same port number in order to use that service for

 

remote management.

 

 

Apply

Click Apply to save your changes back to the NWA3000-N series AP.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

15.8 FTP

You can upload and download the NWA3000-N series AP’s firmware and configuration files using FTP. To use this feature, your computer must have an FTP client. See Chapter 17 on page 241 for more information about firmware and configuration files.

 

215

NWA3000-N Series User’s Guide