Chapter 5 WAN Setup
5.5.1.7 Configuration SummaryThis
Figure 49 WAN Configuration: Configuration Summary
The following table describes the labels in this screen.
Table 29 WAN Configuration: Configuration Summary
LABEL | DESCRIPTION |
Port / VPI / VCI | This is the DSL port number, VPI and VCI for an ATM connection. |
| This displays N/A for an Ethernet WAN conenction or not available for |
| a PTM connection. |
|
|
Connection Type | This is the encapsulation method used by this connection. |
|
|
Service Name | This is the name of the service. |
|
|
Service Category | This is the ATM traffic class. |
| This field is blank for a PTM or Ethernet WAN conenction. |
|
|
IP Address | This shows whether the WAN IP address is assigned by the ISP, |
| manually configured or not configurable. |
|
|
Service State | This shows whether this service is active or not. |
|
|
NAT | This shows whether NAT is active or not for this connection. |
|
|
NAT Type | This shows the type of NAT the |
| connection. |
|
|
Firewall | This shows whether Firewall is active or not for this connection. |
|
|
| 121 |
|
|