Chapter 1 Introducing the P-2812HNU-51c

1.4.4 Wireless Connection

By default, the wireless LAN (WLAN) is enabled on the P-2812HNU-51c. IEEE 802.11a/b/g/n compliant clients can wirelessly connect to the P-2812HNU-51c to access network resources. You can set up a wireless network with WPS (WiFi Protected Setup) or manually add a client to your wireless network.

Figure 6 Wireless Connection Application

WLAN

WAN

LAN

1.4.4.1 The WPS Button

You can use the WPS button on the rear panel of the device to turn the wireless LAN off or on. You can also use it to activate WPS in order to quickly set up a wireless network with strong security.

Turn the Wireless LAN Off or On

1Make sure the POWER LED is on (not blinking).

2Press the WPS button for one second and release it. The WLAN/WPS LED should change from on to off or vice versa.

Activate WPS

1Make sure the POWER LED is on (not blinking).

2Press the WPS button for more than five seconds and release it. Press the WPS button on another WPS -enabled device within range of the P-2812HNU-51c. The WLAN/WPS LED should flash while the P-2812HNU-51c sets up a WPS connection with the wireless device.

28

 

P-2812HNU-51c User’s Guide