Chapter 5 WAN Setup
5.5.1.2 Service TypeIf you set the DSL link type to PPPoA or IPoA for the ATM interface and configure a WAN connection using the ATM interface, you only need to configure the Enter Service Description field in this screen.
Figure 41 WAN Configuration: Service Type
Figure 42 WAN Configuration: Service Type: PPPoA or IPoA
The following table describes the labels in this screen.
Table 22 WAN Configuration: Service Type
LABEL | DESCRIPTION |
Select WAN | Select the method of encapsulation used by your ISP. |
service type | Choices are PPP over Ethernet (PPPoE), IP over Ethernet and |
| |
| Bridging. |
|
|
Enter Service | Specify a name for this connection or use the automatically generated |
Description | one. |
|
|
| 109 |
|
|