Chapter 2 Tutorials
Follow the steps below to map traffic from LAN 1 to PVC 1 and traffic from LAN 2 and LAN 3 to PVC 2.
Table 4 DSL Connection Groups
GROUP | LAN IP ADDRESS | LAN INTERFACE | WAN INTERFACE |
GR1 | 192.168.2.x | LAN1 | ppp1 (0/33) |
|
|
|
|
GR2 | 192.168.3.x | LAN2, LAN3 | atm2 (0/34) |
|
|
|
|
Note: Before configuring interface groups, make sure you are connected to LAN 4 which will not be in a group other than the default group. Otherwise, you need to use the IP address of the new group to access the
Note: You can also use policy forwarding to map traffic from a LAN port to a specific PVC, but you need to enter the source IP address, port number and/or MAC address of each packet that comes from the LAN port. See Chapter 16 on page 297 for more information.
1Click Advanced Setup > Interface Group to open the following screen. Click Add to create a new interface group GR1.
54 |
| |
| ||
|
|
|