Chapter 4 Status Screens

 

Table 7 Status Screen

 

LABEL

DESCRIPTION

 

Memory

This field displays what percentage of the P-2812HNU-51c’s memory is

 

Usage

currently used. Usually, this percentage should not increase much. If

 

 

memory usage does get close to 100%, the P-2812HNU-51c is probably

 

 

becoming unstable, and you should restart the device. See Section 28.4

 

 

on page 376, or turn off the device (unplug the power) for a few

 

 

seconds.

 

 

 

 

Interface Status

 

 

 

 

 

Interface

This column displays each interface the P-2812HNU-51c has.

 

 

 

 

Status

This field indicates whether or not the P-2812HNU-51c is using the

 

 

interface.

 

 

For the DSL interface, this field displays LinkDown (line is down) or Up

 

 

(line is up or connected).

 

 

For the LAN or Ethernet WAN interface, this field displays Up when the

 

 

P-2812HNU-51c is using the interface and NoLink when the line is

 

 

disconnected.

 

 

For the WLAN interface, it displays Up when WLAN is enabled or

 

 

Disabled when WLAN is not active.

 

 

For the 3G WAN interface, it displays:

 

 

NoDevice when no 3G card is inserted,

 

 

Disabled when the 3G WAN is not activated,

 

 

Up when the 3G WAN connection is up,

 

 

Down when the 3G connection is down,

 

 

NoResponse when there is no response from the inserted 3G card,

 

 

NeedPIN if the PIN code you entered in the WAN > 3G Backup

 

 

screen is not the right one for the 3G card you inserted,

 

 

NeedPUK if you enter the PIN (Personal Identification Number)

 

 

code incorrectly for three times and the SIM card is blocked by your

 

 

ISP,

 

 

• or DamagedSIM when the SIM card is damaged or not inserted.

 

 

If a link displays in this field, click the link to view more status

 

 

information or enter the correct PIN or PUK (Personal Unblocking Key)

 

 

code.

 

 

 

 

Rate

For the DSL interface, it displays the downstream and upstream

 

 

transmission rate.

 

 

For the LAN or Ethernet WAN interface, this displays the port speed and

 

 

duplex setting.

 

 

For the WLAN interface, it displays the maximum transmission rate.

 

 

For the 3G WAN interface, it displays the downstream and upstream

 

 

transmission rate.

 

 

 

 

More Status

 

 

 

 

 

WAN Service

Click this link to view packet specific statistics of the WAN

 

Statistics

connection(s). See Section 4.2.3 on page 89.

 

 

 

 

Route Info

Click this link to view the internal routing table on the P-2812HNU-51c.

 

 

See Section 4.2.4 on page 90.

 

 

 

 

85

P-2812HNU-51c User’s Guide