![](/images/backgrounds/127071/127071-522306x1.png)
Chapter 18 RIP
The following table describes the labels in this screen.
Table 100 Advanced > RIP
LABEL | DESCRIPTION |
Interface | This is the name of the interface in which the RIP setting is used. |
|
|
Version | The RIP version controls the format and the broadcasting method of the |
| RIP packets that the |
| when receiving). RIP version 1 is universally supported but RIP version 2 |
| carries more information. RIP version 1 is probably adequate for most |
| networks, unless you have an unusual network topology. |
|
|
Operation | Select Passive to have the |
| based on the RIP packets received from neighbors but not advertise its |
| route information to other routers in this interface. |
| Select Active to have the |
| and also listen for routing updates from neighboring routers. |
|
|
Enabled | Select the check box to activate the settings. |
|
|
Apply/Save | Click Apply/Save to save your changes back to the |
|
|
306 |
| |
| ||
|
|
|