Chapter 29 Diagnostic
Table 136 Maintenance > Diagnostic > 802.1ag (continued)
LABEL | DESCRIPTION |
Maintenance | Type a name of up to 39 printable English keyboard characters for this |
Association (MA) | MA. |
Name | The combined length of the MD Name and MA name must be less or |
| |
| equal to 44bytes. |
|
|
Maintenance | Select the format which the |
Association (MA) | information in the domain (MD). Options are VID, String and |
Format | Integer. |
| If you select VID or Integer, the |
| you specified for an MA in the CCM. |
| If you select String, the |
| specified above in the CCM. |
| Note: The MEPs in the same MA shoule use the same MA format. |
|
|
Destination MAC | Enter the target device’s MAC address to which the |
Address | performs a CFM loopback test. |
|
|
Count | Set how many times the |
| (LBMs). |
|
|
802.1Q VLAN ID | Type a VLAN ID |
|
|
Maintenance End | Enter an ID number |
Point ID | unique ID number within an MD. The MEP ID is to identify an MEP port |
| used when you perform a CFM action |
|
|
Status |
|
|
|
Continuity Check | This shows how many Connectivity Check Messages (CCMs) are sent |
Message (CCM) | and if there is any invalid CCM or |
|
|
Loopback | This shows how many Loop Back Messages (LBMs) are sent and if |
Message (LBM) | there is any inorder or outorder Loop Back Response (LBR) received |
| from a remote MEP. |
|
|
Linktrace | This shows the destination MAC address in the Link Trace Response |
Message (LTM) | (LTR). |
|
|
Save | Click this to save your changes back to the |
|
|
Enable CCM | Click this button to have the selected MEP send Connectivity Check |
| Messages (CCMs) to other MEPs. |
|
|
Disable CCM | Click this button to disallow the selected MEP to send Connectivity |
| Check Messages (CCMs) to other MEPs. |
|
|
Update CC status | Click this button to reload the test result. |
|
|
Send Loopback | Click this button to have the selected MEP send the LBM (Loop Back |
| Message) to a specified remote end point. |
|
|
Send Linktrace | Click this button to have the selected MEP send the LTMs (Link Trace |
| Messages) to a specified remote end point. |
382 |
| |
| ||
|
|
|