Chapter 7 Wireless LAN
7.10 The Advanced Setup Screen
To configure advanced wireless settings, click Network > Wireless LAN > Advanced Setup. The screen appears as shown.
Figure 74 Wireless LAN > Advanced Setup
The following table describes the labels in this screen.
Table 47 Wireless LAN > Advanced Setup
LABEL | DESCRIPTION |
RTS/CTS | Enter a value between 0 and 2432. |
Threshold |
|
|
|
Fragmentation | This is the maximum data fragment size that can be sent. Enter a value |
Threshold | between 256 and 2432. |
|
|
Number of | Specify the maximum number (from 1 to 64) of the wireless stations that |
Wireless | may connect to the |
Stations |
|
Allowed |
|
|
|
Output Power | Set the output power of the |
| APs in an area, decrease the output power to reduce interference with |
| other APs. Select one of the following 20%, 40%, 60%, 80% or |
| 100%. |
|
|
Multicast Rate | Select a data rate at which the |
| multicast traffic. |
| If you select a high rate, multicast traffic may occupy all the bandwidth |
| and cause network congestion. |
|
|
170 |
| |
| ||
|
|
|