Chapter 4 Status Screens

4.2.3 WAN Service Statistics

Click Status > WLAN Service Statistics to access this screen. Use this screen to view the WAN statistics.

Figure 28 Status > WAN Service Statistics

The following table describes the labels in this screen.

Table 10 Status > WAN Service Statistics

LABEL

DESCRIPTION

Interface

This shows the name of the WAN interface used by this connection.

 

A default name ipoax, atmx (where x starts from 0 and is the index

 

number of ATM layer-2 interfaces using different VPI and/or VCI values)

 

or ptm0 indicates the DSL port. The pppx name (where x starts from 1

 

and is the index number of PPP connection on the P-2812HNU-51c)

 

indicates a PPP connection via any one of the WAN interface. eth4

 

indicates the Ethernet WAN interface (the physical Ethernet WAN port).

 

The number after the dot (.) represents the VLAN ID number assigned to

 

traffic sent through this connection. The number after the underscore

 

(_) represents the index number of connections through the same

 

interface.

 

(null) means the entry is not valid.

 

 

Description

This shows the descriptive name of this connection.

 

8 and 35 or 0 and 1 are the default VPI and VCI numbers. The last

 

number represents the index number of connections over the same PVC

 

or the VLAN ID number assigned to traffic sent through this connection.

 

(null) means the entry is not valid.

 

 

Received

 

 

 

 

89

P-2812HNU-51c User’s Guide