Chapter 19 Quality of Service (QoS)
queues). Your P-2812HNU-51c uses the Token Bucket algorithm to allow a certain amount of large bursts while keeping a limit at the average rate.
(Before Traffic Shaping) | (After Traffic Shaping) |
Traffic Policing
Traffic policing is the limiting of the input or output transmission rate of a class of traffic on the basis of user-defined criteria. Traffic policing methods measure traffic flows against user-defined criteria and identify it as either conforming, exceeding or violating the criteria.
(Before Traffic Policing) | (After Traffic Policing) |
The P-2812HNU-51c supports three incoming traffic metering algorithms: Token Bucket Filter (TBF), Single Rate Two Color Maker (srTCM), and Two Rate Two Color Marker (trTCM). You can specify actions which are performed on the colored packets. See Section 19.8 on page 324 for more information on each metering algorithm.
19.3 The Quality of Service General Screen
Click Advanced Setup > Quality of Service to open the screen as shown next.
Use this screen to enable or disable QoS, set the bandwidth, and select to have the P-2812HNU-51c automatically assign priority to upstream traffic according to
| 309 |
P-2812HNU-51c User’s Guide |
| |
